Line data Source code
1 : /*
2 : * Copyright (c) 2016 Intel Corporation
3 : *
4 : * Permission to use, copy, modify, distribute, and sell this software and its
5 : * documentation for any purpose is hereby granted without fee, provided that
6 : * the above copyright notice appear in all copies and that both that copyright
7 : * notice and this permission notice appear in supporting documentation, and
8 : * that the name of the copyright holders not be used in advertising or
9 : * publicity pertaining to distribution of the software without specific,
10 : * written prior permission. The copyright holders make no representations
11 : * about the suitability of this software for any purpose. It is provided "as
12 : * is" without express or implied warranty.
13 : *
14 : * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 : * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 : * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 : * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 : * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 : * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 : * OF THIS SOFTWARE.
21 : */
22 :
23 : #ifndef __DRM_BRIDGE_H__
24 : #define __DRM_BRIDGE_H__
25 :
26 : #include <linux/ctype.h>
27 : #include <linux/list.h>
28 : #include <linux/mutex.h>
29 :
30 : #include <drm/drm_atomic.h>
31 : #include <drm/drm_encoder.h>
32 : #include <drm/drm_mode_object.h>
33 : #include <drm/drm_modes.h>
34 :
35 : struct drm_bridge;
36 : struct drm_bridge_timings;
37 : struct drm_connector;
38 : struct drm_display_info;
39 : struct drm_panel;
40 : struct edid;
41 : struct i2c_adapter;
42 :
43 : /**
44 : * enum drm_bridge_attach_flags - Flags for &drm_bridge_funcs.attach
45 : */
46 : enum drm_bridge_attach_flags {
47 : /**
48 : * @DRM_BRIDGE_ATTACH_NO_CONNECTOR: When this flag is set the bridge
49 : * shall not create a drm_connector.
50 : */
51 : DRM_BRIDGE_ATTACH_NO_CONNECTOR = BIT(0),
52 : };
53 :
54 : /**
55 : * struct drm_bridge_funcs - drm_bridge control functions
56 : */
57 : struct drm_bridge_funcs {
58 : /**
59 : * @attach:
60 : *
61 : * This callback is invoked whenever our bridge is being attached to a
62 : * &drm_encoder. The flags argument tunes the behaviour of the attach
63 : * operation (see DRM_BRIDGE_ATTACH_*).
64 : *
65 : * The @attach callback is optional.
66 : *
67 : * RETURNS:
68 : *
69 : * Zero on success, error code on failure.
70 : */
71 : int (*attach)(struct drm_bridge *bridge,
72 : enum drm_bridge_attach_flags flags);
73 :
74 : /**
75 : * @detach:
76 : *
77 : * This callback is invoked whenever our bridge is being detached from a
78 : * &drm_encoder.
79 : *
80 : * The @detach callback is optional.
81 : */
82 : void (*detach)(struct drm_bridge *bridge);
83 :
84 : /**
85 : * @mode_valid:
86 : *
87 : * This callback is used to check if a specific mode is valid in this
88 : * bridge. This should be implemented if the bridge has some sort of
89 : * restriction in the modes it can display. For example, a given bridge
90 : * may be responsible to set a clock value. If the clock can not
91 : * produce all the values for the available modes then this callback
92 : * can be used to restrict the number of modes to only the ones that
93 : * can be displayed.
94 : *
95 : * This hook is used by the probe helpers to filter the mode list in
96 : * drm_helper_probe_single_connector_modes(), and it is used by the
97 : * atomic helpers to validate modes supplied by userspace in
98 : * drm_atomic_helper_check_modeset().
99 : *
100 : * The @mode_valid callback is optional.
101 : *
102 : * NOTE:
103 : *
104 : * Since this function is both called from the check phase of an atomic
105 : * commit, and the mode validation in the probe paths it is not allowed
106 : * to look at anything else but the passed-in mode, and validate it
107 : * against configuration-invariant hardward constraints. Any further
108 : * limits which depend upon the configuration can only be checked in
109 : * @mode_fixup.
110 : *
111 : * RETURNS:
112 : *
113 : * drm_mode_status Enum
114 : */
115 : enum drm_mode_status (*mode_valid)(struct drm_bridge *bridge,
116 : const struct drm_display_info *info,
117 : const struct drm_display_mode *mode);
118 :
119 : /**
120 : * @mode_fixup:
121 : *
122 : * This callback is used to validate and adjust a mode. The parameter
123 : * mode is the display mode that should be fed to the next element in
124 : * the display chain, either the final &drm_connector or the next
125 : * &drm_bridge. The parameter adjusted_mode is the input mode the bridge
126 : * requires. It can be modified by this callback and does not need to
127 : * match mode. See also &drm_crtc_state.adjusted_mode for more details.
128 : *
129 : * This is the only hook that allows a bridge to reject a modeset. If
130 : * this function passes all other callbacks must succeed for this
131 : * configuration.
132 : *
133 : * The mode_fixup callback is optional. &drm_bridge_funcs.mode_fixup()
134 : * is not called when &drm_bridge_funcs.atomic_check() is implemented,
135 : * so only one of them should be provided.
136 : *
137 : * NOTE:
138 : *
139 : * This function is called in the check phase of atomic modesets, which
140 : * can be aborted for any reason (including on userspace's request to
141 : * just check whether a configuration would be possible). Drivers MUST
142 : * NOT touch any persistent state (hardware or software) or data
143 : * structures except the passed in @state parameter.
144 : *
145 : * Also beware that userspace can request its own custom modes, neither
146 : * core nor helpers filter modes to the list of probe modes reported by
147 : * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
148 : * that modes are filtered consistently put any bridge constraints and
149 : * limits checks into @mode_valid.
150 : *
151 : * RETURNS:
152 : *
153 : * True if an acceptable configuration is possible, false if the modeset
154 : * operation should be rejected.
155 : */
156 : bool (*mode_fixup)(struct drm_bridge *bridge,
157 : const struct drm_display_mode *mode,
158 : struct drm_display_mode *adjusted_mode);
159 : /**
160 : * @disable:
161 : *
162 : * This callback should disable the bridge. It is called right before
163 : * the preceding element in the display pipe is disabled. If the
164 : * preceding element is a bridge this means it's called before that
165 : * bridge's @disable vfunc. If the preceding element is a &drm_encoder
166 : * it's called right before the &drm_encoder_helper_funcs.disable,
167 : * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms
168 : * hook.
169 : *
170 : * The bridge can assume that the display pipe (i.e. clocks and timing
171 : * signals) feeding it is still running when this callback is called.
172 : *
173 : * The @disable callback is optional.
174 : *
175 : * NOTE:
176 : *
177 : * This is deprecated, do not use!
178 : * New drivers shall use &drm_bridge_funcs.atomic_disable.
179 : */
180 : void (*disable)(struct drm_bridge *bridge);
181 :
182 : /**
183 : * @post_disable:
184 : *
185 : * This callback should disable the bridge. It is called right after the
186 : * preceding element in the display pipe is disabled. If the preceding
187 : * element is a bridge this means it's called after that bridge's
188 : * @post_disable function. If the preceding element is a &drm_encoder
189 : * it's called right after the encoder's
190 : * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
191 : * or &drm_encoder_helper_funcs.dpms hook.
192 : *
193 : * The bridge must assume that the display pipe (i.e. clocks and timing
194 : * singals) feeding it is no longer running when this callback is
195 : * called.
196 : *
197 : * The @post_disable callback is optional.
198 : *
199 : * NOTE:
200 : *
201 : * This is deprecated, do not use!
202 : * New drivers shall use &drm_bridge_funcs.atomic_post_disable.
203 : */
204 : void (*post_disable)(struct drm_bridge *bridge);
205 :
206 : /**
207 : * @mode_set:
208 : *
209 : * This callback should set the given mode on the bridge. It is called
210 : * after the @mode_set callback for the preceding element in the display
211 : * pipeline has been called already. If the bridge is the first element
212 : * then this would be &drm_encoder_helper_funcs.mode_set. The display
213 : * pipe (i.e. clocks and timing signals) is off when this function is
214 : * called.
215 : *
216 : * The adjusted_mode parameter is the mode output by the CRTC for the
217 : * first bridge in the chain. It can be different from the mode
218 : * parameter that contains the desired mode for the connector at the end
219 : * of the bridges chain, for instance when the first bridge in the chain
220 : * performs scaling. The adjusted mode is mostly useful for the first
221 : * bridge in the chain and is likely irrelevant for the other bridges.
222 : *
223 : * For atomic drivers the adjusted_mode is the mode stored in
224 : * &drm_crtc_state.adjusted_mode.
225 : *
226 : * NOTE:
227 : *
228 : * This is deprecated, do not use!
229 : * New drivers shall set their mode in the
230 : * &drm_bridge_funcs.atomic_enable operation.
231 : */
232 : void (*mode_set)(struct drm_bridge *bridge,
233 : const struct drm_display_mode *mode,
234 : const struct drm_display_mode *adjusted_mode);
235 : /**
236 : * @pre_enable:
237 : *
238 : * This callback should enable the bridge. It is called right before
239 : * the preceding element in the display pipe is enabled. If the
240 : * preceding element is a bridge this means it's called before that
241 : * bridge's @pre_enable function. If the preceding element is a
242 : * &drm_encoder it's called right before the encoder's
243 : * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
244 : * &drm_encoder_helper_funcs.dpms hook.
245 : *
246 : * The display pipe (i.e. clocks and timing signals) feeding this bridge
247 : * will not yet be running when this callback is called. The bridge must
248 : * not enable the display link feeding the next bridge in the chain (if
249 : * there is one) when this callback is called.
250 : *
251 : * The @pre_enable callback is optional.
252 : *
253 : * NOTE:
254 : *
255 : * This is deprecated, do not use!
256 : * New drivers shall use &drm_bridge_funcs.atomic_pre_enable.
257 : */
258 : void (*pre_enable)(struct drm_bridge *bridge);
259 :
260 : /**
261 : * @enable:
262 : *
263 : * This callback should enable the bridge. It is called right after
264 : * the preceding element in the display pipe is enabled. If the
265 : * preceding element is a bridge this means it's called after that
266 : * bridge's @enable function. If the preceding element is a
267 : * &drm_encoder it's called right after the encoder's
268 : * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
269 : * &drm_encoder_helper_funcs.dpms hook.
270 : *
271 : * The bridge can assume that the display pipe (i.e. clocks and timing
272 : * signals) feeding it is running when this callback is called. This
273 : * callback must enable the display link feeding the next bridge in the
274 : * chain if there is one.
275 : *
276 : * The @enable callback is optional.
277 : *
278 : * NOTE:
279 : *
280 : * This is deprecated, do not use!
281 : * New drivers shall use &drm_bridge_funcs.atomic_enable.
282 : */
283 : void (*enable)(struct drm_bridge *bridge);
284 :
285 : /**
286 : * @atomic_pre_enable:
287 : *
288 : * This callback should enable the bridge. It is called right before
289 : * the preceding element in the display pipe is enabled. If the
290 : * preceding element is a bridge this means it's called before that
291 : * bridge's @atomic_pre_enable or @pre_enable function. If the preceding
292 : * element is a &drm_encoder it's called right before the encoder's
293 : * &drm_encoder_helper_funcs.atomic_enable hook.
294 : *
295 : * The display pipe (i.e. clocks and timing signals) feeding this bridge
296 : * will not yet be running when this callback is called. The bridge must
297 : * not enable the display link feeding the next bridge in the chain (if
298 : * there is one) when this callback is called.
299 : *
300 : * The @atomic_pre_enable callback is optional.
301 : */
302 : void (*atomic_pre_enable)(struct drm_bridge *bridge,
303 : struct drm_bridge_state *old_bridge_state);
304 :
305 : /**
306 : * @atomic_enable:
307 : *
308 : * This callback should enable the bridge. It is called right after
309 : * the preceding element in the display pipe is enabled. If the
310 : * preceding element is a bridge this means it's called after that
311 : * bridge's @atomic_enable or @enable function. If the preceding element
312 : * is a &drm_encoder it's called right after the encoder's
313 : * &drm_encoder_helper_funcs.atomic_enable hook.
314 : *
315 : * The bridge can assume that the display pipe (i.e. clocks and timing
316 : * signals) feeding it is running when this callback is called. This
317 : * callback must enable the display link feeding the next bridge in the
318 : * chain if there is one.
319 : *
320 : * The @atomic_enable callback is optional.
321 : */
322 : void (*atomic_enable)(struct drm_bridge *bridge,
323 : struct drm_bridge_state *old_bridge_state);
324 : /**
325 : * @atomic_disable:
326 : *
327 : * This callback should disable the bridge. It is called right before
328 : * the preceding element in the display pipe is disabled. If the
329 : * preceding element is a bridge this means it's called before that
330 : * bridge's @atomic_disable or @disable vfunc. If the preceding element
331 : * is a &drm_encoder it's called right before the
332 : * &drm_encoder_helper_funcs.atomic_disable hook.
333 : *
334 : * The bridge can assume that the display pipe (i.e. clocks and timing
335 : * signals) feeding it is still running when this callback is called.
336 : *
337 : * The @atomic_disable callback is optional.
338 : */
339 : void (*atomic_disable)(struct drm_bridge *bridge,
340 : struct drm_bridge_state *old_bridge_state);
341 :
342 : /**
343 : * @atomic_post_disable:
344 : *
345 : * This callback should disable the bridge. It is called right after the
346 : * preceding element in the display pipe is disabled. If the preceding
347 : * element is a bridge this means it's called after that bridge's
348 : * @atomic_post_disable or @post_disable function. If the preceding
349 : * element is a &drm_encoder it's called right after the encoder's
350 : * &drm_encoder_helper_funcs.atomic_disable hook.
351 : *
352 : * The bridge must assume that the display pipe (i.e. clocks and timing
353 : * signals) feeding it is no longer running when this callback is
354 : * called.
355 : *
356 : * The @atomic_post_disable callback is optional.
357 : */
358 : void (*atomic_post_disable)(struct drm_bridge *bridge,
359 : struct drm_bridge_state *old_bridge_state);
360 :
361 : /**
362 : * @atomic_duplicate_state:
363 : *
364 : * Duplicate the current bridge state object (which is guaranteed to be
365 : * non-NULL).
366 : *
367 : * The atomic_duplicate_state hook is mandatory if the bridge
368 : * implements any of the atomic hooks, and should be left unassigned
369 : * otherwise. For bridges that don't subclass &drm_bridge_state, the
370 : * drm_atomic_helper_bridge_duplicate_state() helper function shall be
371 : * used to implement this hook.
372 : *
373 : * RETURNS:
374 : * A valid drm_bridge_state object or NULL if the allocation fails.
375 : */
376 : struct drm_bridge_state *(*atomic_duplicate_state)(struct drm_bridge *bridge);
377 :
378 : /**
379 : * @atomic_destroy_state:
380 : *
381 : * Destroy a bridge state object previously allocated by
382 : * &drm_bridge_funcs.atomic_duplicate_state().
383 : *
384 : * The atomic_destroy_state hook is mandatory if the bridge implements
385 : * any of the atomic hooks, and should be left unassigned otherwise.
386 : * For bridges that don't subclass &drm_bridge_state, the
387 : * drm_atomic_helper_bridge_destroy_state() helper function shall be
388 : * used to implement this hook.
389 : */
390 : void (*atomic_destroy_state)(struct drm_bridge *bridge,
391 : struct drm_bridge_state *state);
392 :
393 : /**
394 : * @atomic_get_output_bus_fmts:
395 : *
396 : * Return the supported bus formats on the output end of a bridge.
397 : * The returned array must be allocated with kmalloc() and will be
398 : * freed by the caller. If the allocation fails, NULL should be
399 : * returned. num_output_fmts must be set to the returned array size.
400 : * Formats listed in the returned array should be listed in decreasing
401 : * preference order (the core will try all formats until it finds one
402 : * that works).
403 : *
404 : * This method is only called on the last element of the bridge chain
405 : * as part of the bus format negotiation process that happens in
406 : * &drm_atomic_bridge_chain_select_bus_fmts().
407 : * This method is optional. When not implemented, the core will
408 : * fall back to &drm_connector.display_info.bus_formats[0] if
409 : * &drm_connector.display_info.num_bus_formats > 0,
410 : * or to MEDIA_BUS_FMT_FIXED otherwise.
411 : */
412 : u32 *(*atomic_get_output_bus_fmts)(struct drm_bridge *bridge,
413 : struct drm_bridge_state *bridge_state,
414 : struct drm_crtc_state *crtc_state,
415 : struct drm_connector_state *conn_state,
416 : unsigned int *num_output_fmts);
417 :
418 : /**
419 : * @atomic_get_input_bus_fmts:
420 : *
421 : * Return the supported bus formats on the input end of a bridge for
422 : * a specific output bus format.
423 : *
424 : * The returned array must be allocated with kmalloc() and will be
425 : * freed by the caller. If the allocation fails, NULL should be
426 : * returned. num_output_fmts must be set to the returned array size.
427 : * Formats listed in the returned array should be listed in decreasing
428 : * preference order (the core will try all formats until it finds one
429 : * that works). When the format is not supported NULL should be
430 : * returned and num_output_fmts should be set to 0.
431 : *
432 : * This method is called on all elements of the bridge chain as part of
433 : * the bus format negotiation process that happens in
434 : * drm_atomic_bridge_chain_select_bus_fmts().
435 : * This method is optional. When not implemented, the core will bypass
436 : * bus format negotiation on this element of the bridge without
437 : * failing, and the previous element in the chain will be passed
438 : * MEDIA_BUS_FMT_FIXED as its output bus format.
439 : *
440 : * Bridge drivers that need to support being linked to bridges that are
441 : * not supporting bus format negotiation should handle the
442 : * output_fmt == MEDIA_BUS_FMT_FIXED case appropriately, by selecting a
443 : * sensible default value or extracting this information from somewhere
444 : * else (FW property, &drm_display_mode, &drm_display_info, ...)
445 : *
446 : * Note: Even if input format selection on the first bridge has no
447 : * impact on the negotiation process (bus format negotiation stops once
448 : * we reach the first element of the chain), drivers are expected to
449 : * return accurate input formats as the input format may be used to
450 : * configure the CRTC output appropriately.
451 : */
452 : u32 *(*atomic_get_input_bus_fmts)(struct drm_bridge *bridge,
453 : struct drm_bridge_state *bridge_state,
454 : struct drm_crtc_state *crtc_state,
455 : struct drm_connector_state *conn_state,
456 : u32 output_fmt,
457 : unsigned int *num_input_fmts);
458 :
459 : /**
460 : * @atomic_check:
461 : *
462 : * This method is responsible for checking bridge state correctness.
463 : * It can also check the state of the surrounding components in chain
464 : * to make sure the whole pipeline can work properly.
465 : *
466 : * &drm_bridge_funcs.atomic_check() hooks are called in reverse
467 : * order (from the last to the first bridge).
468 : *
469 : * This method is optional. &drm_bridge_funcs.mode_fixup() is not
470 : * called when &drm_bridge_funcs.atomic_check() is implemented, so only
471 : * one of them should be provided.
472 : *
473 : * If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or
474 : * &drm_bridge_state.output_bus_cfg.flags it should happen in
475 : * this function. By default the &drm_bridge_state.output_bus_cfg.flags
476 : * field is set to the next bridge
477 : * &drm_bridge_state.input_bus_cfg.flags value or
478 : * &drm_connector.display_info.bus_flags if the bridge is the last
479 : * element in the chain.
480 : *
481 : * RETURNS:
482 : * zero if the check passed, a negative error code otherwise.
483 : */
484 : int (*atomic_check)(struct drm_bridge *bridge,
485 : struct drm_bridge_state *bridge_state,
486 : struct drm_crtc_state *crtc_state,
487 : struct drm_connector_state *conn_state);
488 :
489 : /**
490 : * @atomic_reset:
491 : *
492 : * Reset the bridge to a predefined state (or retrieve its current
493 : * state) and return a &drm_bridge_state object matching this state.
494 : * This function is called at attach time.
495 : *
496 : * The atomic_reset hook is mandatory if the bridge implements any of
497 : * the atomic hooks, and should be left unassigned otherwise. For
498 : * bridges that don't subclass &drm_bridge_state, the
499 : * drm_atomic_helper_bridge_reset() helper function shall be used to
500 : * implement this hook.
501 : *
502 : * Note that the atomic_reset() semantics is not exactly matching the
503 : * reset() semantics found on other components (connector, plane, ...).
504 : *
505 : * 1. The reset operation happens when the bridge is attached, not when
506 : * drm_mode_config_reset() is called
507 : * 2. It's meant to be used exclusively on bridges that have been
508 : * converted to the ATOMIC API
509 : *
510 : * RETURNS:
511 : * A valid drm_bridge_state object in case of success, an ERR_PTR()
512 : * giving the reason of the failure otherwise.
513 : */
514 : struct drm_bridge_state *(*atomic_reset)(struct drm_bridge *bridge);
515 :
516 : /**
517 : * @detect:
518 : *
519 : * Check if anything is attached to the bridge output.
520 : *
521 : * This callback is optional, if not implemented the bridge will be
522 : * considered as always having a component attached to its output.
523 : * Bridges that implement this callback shall set the
524 : * DRM_BRIDGE_OP_DETECT flag in their &drm_bridge->ops.
525 : *
526 : * RETURNS:
527 : *
528 : * drm_connector_status indicating the bridge output status.
529 : */
530 : enum drm_connector_status (*detect)(struct drm_bridge *bridge);
531 :
532 : /**
533 : * @get_modes:
534 : *
535 : * Fill all modes currently valid for the sink into the &drm_connector
536 : * with drm_mode_probed_add().
537 : *
538 : * The @get_modes callback is mostly intended to support non-probeable
539 : * displays such as many fixed panels. Bridges that support reading
540 : * EDID shall leave @get_modes unimplemented and implement the
541 : * &drm_bridge_funcs->get_edid callback instead.
542 : *
543 : * This callback is optional. Bridges that implement it shall set the
544 : * DRM_BRIDGE_OP_MODES flag in their &drm_bridge->ops.
545 : *
546 : * The connector parameter shall be used for the sole purpose of
547 : * filling modes, and shall not be stored internally by bridge drivers
548 : * for future usage.
549 : *
550 : * RETURNS:
551 : *
552 : * The number of modes added by calling drm_mode_probed_add().
553 : */
554 : int (*get_modes)(struct drm_bridge *bridge,
555 : struct drm_connector *connector);
556 :
557 : /**
558 : * @get_edid:
559 : *
560 : * Read and parse the EDID data of the connected display.
561 : *
562 : * The @get_edid callback is the preferred way of reporting mode
563 : * information for a display connected to the bridge output. Bridges
564 : * that support reading EDID shall implement this callback and leave
565 : * the @get_modes callback unimplemented.
566 : *
567 : * The caller of this operation shall first verify the output
568 : * connection status and refrain from reading EDID from a disconnected
569 : * output.
570 : *
571 : * This callback is optional. Bridges that implement it shall set the
572 : * DRM_BRIDGE_OP_EDID flag in their &drm_bridge->ops.
573 : *
574 : * The connector parameter shall be used for the sole purpose of EDID
575 : * retrieval and parsing, and shall not be stored internally by bridge
576 : * drivers for future usage.
577 : *
578 : * RETURNS:
579 : *
580 : * An edid structure newly allocated with kmalloc() (or similar) on
581 : * success, or NULL otherwise. The caller is responsible for freeing
582 : * the returned edid structure with kfree().
583 : */
584 : struct edid *(*get_edid)(struct drm_bridge *bridge,
585 : struct drm_connector *connector);
586 :
587 : /**
588 : * @hpd_notify:
589 : *
590 : * Notify the bridge of hot plug detection.
591 : *
592 : * This callback is optional, it may be implemented by bridges that
593 : * need to be notified of display connection or disconnection for
594 : * internal reasons. One use case is to reset the internal state of CEC
595 : * controllers for HDMI bridges.
596 : */
597 : void (*hpd_notify)(struct drm_bridge *bridge,
598 : enum drm_connector_status status);
599 :
600 : /**
601 : * @hpd_enable:
602 : *
603 : * Enable hot plug detection. From now on the bridge shall call
604 : * drm_bridge_hpd_notify() each time a change is detected in the output
605 : * connection status, until hot plug detection gets disabled with
606 : * @hpd_disable.
607 : *
608 : * This callback is optional and shall only be implemented by bridges
609 : * that support hot-plug notification without polling. Bridges that
610 : * implement it shall also implement the @hpd_disable callback and set
611 : * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
612 : */
613 : void (*hpd_enable)(struct drm_bridge *bridge);
614 :
615 : /**
616 : * @hpd_disable:
617 : *
618 : * Disable hot plug detection. Once this function returns the bridge
619 : * shall not call drm_bridge_hpd_notify() when a change in the output
620 : * connection status occurs.
621 : *
622 : * This callback is optional and shall only be implemented by bridges
623 : * that support hot-plug notification without polling. Bridges that
624 : * implement it shall also implement the @hpd_enable callback and set
625 : * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
626 : */
627 : void (*hpd_disable)(struct drm_bridge *bridge);
628 :
629 : /**
630 : * @debugfs_init:
631 : *
632 : * Allows bridges to create bridge-specific debugfs files.
633 : */
634 : void (*debugfs_init)(struct drm_bridge *bridge, struct dentry *root);
635 : };
636 :
637 : /**
638 : * struct drm_bridge_timings - timing information for the bridge
639 : */
640 : struct drm_bridge_timings {
641 : /**
642 : * @input_bus_flags:
643 : *
644 : * Tells what additional settings for the pixel data on the bus
645 : * this bridge requires (like pixel signal polarity). See also
646 : * &drm_display_info->bus_flags.
647 : */
648 : u32 input_bus_flags;
649 : /**
650 : * @setup_time_ps:
651 : *
652 : * Defines the time in picoseconds the input data lines must be
653 : * stable before the clock edge.
654 : */
655 : u32 setup_time_ps;
656 : /**
657 : * @hold_time_ps:
658 : *
659 : * Defines the time in picoseconds taken for the bridge to sample the
660 : * input signal after the clock edge.
661 : */
662 : u32 hold_time_ps;
663 : /**
664 : * @dual_link:
665 : *
666 : * True if the bus operates in dual-link mode. The exact meaning is
667 : * dependent on the bus type. For LVDS buses, this indicates that even-
668 : * and odd-numbered pixels are received on separate links.
669 : */
670 : bool dual_link;
671 : };
672 :
673 : /**
674 : * enum drm_bridge_ops - Bitmask of operations supported by the bridge
675 : */
676 : enum drm_bridge_ops {
677 : /**
678 : * @DRM_BRIDGE_OP_DETECT: The bridge can detect displays connected to
679 : * its output. Bridges that set this flag shall implement the
680 : * &drm_bridge_funcs->detect callback.
681 : */
682 : DRM_BRIDGE_OP_DETECT = BIT(0),
683 : /**
684 : * @DRM_BRIDGE_OP_EDID: The bridge can retrieve the EDID of the display
685 : * connected to its output. Bridges that set this flag shall implement
686 : * the &drm_bridge_funcs->get_edid callback.
687 : */
688 : DRM_BRIDGE_OP_EDID = BIT(1),
689 : /**
690 : * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and hot-unplug
691 : * without requiring polling. Bridges that set this flag shall
692 : * implement the &drm_bridge_funcs->hpd_enable and
693 : * &drm_bridge_funcs->hpd_disable callbacks if they support enabling
694 : * and disabling hot-plug detection dynamically.
695 : */
696 : DRM_BRIDGE_OP_HPD = BIT(2),
697 : /**
698 : * @DRM_BRIDGE_OP_MODES: The bridge can retrieve the modes supported
699 : * by the display at its output. This does not include reading EDID
700 : * which is separately covered by @DRM_BRIDGE_OP_EDID. Bridges that set
701 : * this flag shall implement the &drm_bridge_funcs->get_modes callback.
702 : */
703 : DRM_BRIDGE_OP_MODES = BIT(3),
704 : };
705 :
706 : /**
707 : * struct drm_bridge - central DRM bridge control structure
708 : */
709 : struct drm_bridge {
710 : /** @base: inherit from &drm_private_object */
711 : struct drm_private_obj base;
712 : /** @dev: DRM device this bridge belongs to */
713 : struct drm_device *dev;
714 : /** @encoder: encoder to which this bridge is connected */
715 : struct drm_encoder *encoder;
716 : /** @chain_node: used to form a bridge chain */
717 : struct list_head chain_node;
718 : #ifdef CONFIG_OF
719 : /** @of_node: device node pointer to the bridge */
720 : struct device_node *of_node;
721 : #endif
722 : /** @list: to keep track of all added bridges */
723 : struct list_head list;
724 : /**
725 : * @timings:
726 : *
727 : * the timing specification for the bridge, if any (may be NULL)
728 : */
729 : const struct drm_bridge_timings *timings;
730 : /** @funcs: control functions */
731 : const struct drm_bridge_funcs *funcs;
732 : /** @driver_private: pointer to the bridge driver's internal context */
733 : void *driver_private;
734 : /** @ops: bitmask of operations supported by the bridge */
735 : enum drm_bridge_ops ops;
736 : /**
737 : * @type: Type of the connection at the bridge output
738 : * (DRM_MODE_CONNECTOR_*). For bridges at the end of this chain this
739 : * identifies the type of connected display.
740 : */
741 : int type;
742 : /**
743 : * @interlace_allowed: Indicate that the bridge can handle interlaced
744 : * modes.
745 : */
746 : bool interlace_allowed;
747 : /**
748 : * @pre_enable_prev_first: The bridge requires that the prev
749 : * bridge @pre_enable function is called before its @pre_enable,
750 : * and conversely for post_disable. This is most frequently a
751 : * requirement for DSI devices which need the host to be initialised
752 : * before the peripheral.
753 : */
754 : bool pre_enable_prev_first;
755 : /**
756 : * @ddc: Associated I2C adapter for DDC access, if any.
757 : */
758 : struct i2c_adapter *ddc;
759 : /** private: */
760 : /**
761 : * @hpd_mutex: Protects the @hpd_cb and @hpd_data fields.
762 : */
763 : struct mutex hpd_mutex;
764 : /**
765 : * @hpd_cb: Hot plug detection callback, registered with
766 : * drm_bridge_hpd_enable().
767 : */
768 : void (*hpd_cb)(void *data, enum drm_connector_status status);
769 : /**
770 : * @hpd_data: Private data passed to the Hot plug detection callback
771 : * @hpd_cb.
772 : */
773 : void *hpd_data;
774 : };
775 :
776 : static inline struct drm_bridge *
777 : drm_priv_to_bridge(struct drm_private_obj *priv)
778 : {
779 0 : return container_of(priv, struct drm_bridge, base);
780 : }
781 :
782 : void drm_bridge_add(struct drm_bridge *bridge);
783 : int devm_drm_bridge_add(struct device *dev, struct drm_bridge *bridge);
784 : void drm_bridge_remove(struct drm_bridge *bridge);
785 : int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
786 : struct drm_bridge *previous,
787 : enum drm_bridge_attach_flags flags);
788 :
789 : #ifdef CONFIG_OF
790 : struct drm_bridge *of_drm_find_bridge(struct device_node *np);
791 : #else
792 : static inline struct drm_bridge *of_drm_find_bridge(struct device_node *np)
793 : {
794 : return NULL;
795 : }
796 : #endif
797 :
798 : /**
799 : * drm_bridge_get_next_bridge() - Get the next bridge in the chain
800 : * @bridge: bridge object
801 : *
802 : * RETURNS:
803 : * the next bridge in the chain after @bridge, or NULL if @bridge is the last.
804 : */
805 : static inline struct drm_bridge *
806 : drm_bridge_get_next_bridge(struct drm_bridge *bridge)
807 : {
808 0 : if (list_is_last(&bridge->chain_node, &bridge->encoder->bridge_chain))
809 : return NULL;
810 :
811 0 : return list_next_entry(bridge, chain_node);
812 : }
813 :
814 : /**
815 : * drm_bridge_get_prev_bridge() - Get the previous bridge in the chain
816 : * @bridge: bridge object
817 : *
818 : * RETURNS:
819 : * the previous bridge in the chain, or NULL if @bridge is the first.
820 : */
821 : static inline struct drm_bridge *
822 : drm_bridge_get_prev_bridge(struct drm_bridge *bridge)
823 : {
824 0 : if (list_is_first(&bridge->chain_node, &bridge->encoder->bridge_chain))
825 : return NULL;
826 :
827 0 : return list_prev_entry(bridge, chain_node);
828 : }
829 :
830 : /**
831 : * drm_bridge_chain_get_first_bridge() - Get the first bridge in the chain
832 : * @encoder: encoder object
833 : *
834 : * RETURNS:
835 : * the first bridge in the chain, or NULL if @encoder has no bridge attached
836 : * to it.
837 : */
838 : static inline struct drm_bridge *
839 : drm_bridge_chain_get_first_bridge(struct drm_encoder *encoder)
840 : {
841 0 : return list_first_entry_or_null(&encoder->bridge_chain,
842 : struct drm_bridge, chain_node);
843 : }
844 :
845 : /**
846 : * drm_for_each_bridge_in_chain() - Iterate over all bridges present in a chain
847 : * @encoder: the encoder to iterate bridges on
848 : * @bridge: a bridge pointer updated to point to the current bridge at each
849 : * iteration
850 : *
851 : * Iterate over all bridges present in the bridge chain attached to @encoder.
852 : */
853 : #define drm_for_each_bridge_in_chain(encoder, bridge) \
854 : list_for_each_entry(bridge, &(encoder)->bridge_chain, chain_node)
855 :
856 : bool drm_bridge_chain_mode_fixup(struct drm_bridge *bridge,
857 : const struct drm_display_mode *mode,
858 : struct drm_display_mode *adjusted_mode);
859 : enum drm_mode_status
860 : drm_bridge_chain_mode_valid(struct drm_bridge *bridge,
861 : const struct drm_display_info *info,
862 : const struct drm_display_mode *mode);
863 : void drm_bridge_chain_mode_set(struct drm_bridge *bridge,
864 : const struct drm_display_mode *mode,
865 : const struct drm_display_mode *adjusted_mode);
866 :
867 : int drm_atomic_bridge_chain_check(struct drm_bridge *bridge,
868 : struct drm_crtc_state *crtc_state,
869 : struct drm_connector_state *conn_state);
870 : void drm_atomic_bridge_chain_disable(struct drm_bridge *bridge,
871 : struct drm_atomic_state *state);
872 : void drm_atomic_bridge_chain_post_disable(struct drm_bridge *bridge,
873 : struct drm_atomic_state *state);
874 : void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge,
875 : struct drm_atomic_state *state);
876 : void drm_atomic_bridge_chain_enable(struct drm_bridge *bridge,
877 : struct drm_atomic_state *state);
878 :
879 : u32 *
880 : drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
881 : struct drm_bridge_state *bridge_state,
882 : struct drm_crtc_state *crtc_state,
883 : struct drm_connector_state *conn_state,
884 : u32 output_fmt,
885 : unsigned int *num_input_fmts);
886 :
887 : enum drm_connector_status drm_bridge_detect(struct drm_bridge *bridge);
888 : int drm_bridge_get_modes(struct drm_bridge *bridge,
889 : struct drm_connector *connector);
890 : struct edid *drm_bridge_get_edid(struct drm_bridge *bridge,
891 : struct drm_connector *connector);
892 : void drm_bridge_hpd_enable(struct drm_bridge *bridge,
893 : void (*cb)(void *data,
894 : enum drm_connector_status status),
895 : void *data);
896 : void drm_bridge_hpd_disable(struct drm_bridge *bridge);
897 : void drm_bridge_hpd_notify(struct drm_bridge *bridge,
898 : enum drm_connector_status status);
899 :
900 : #ifdef CONFIG_DRM_PANEL_BRIDGE
901 : bool drm_bridge_is_panel(const struct drm_bridge *bridge);
902 : struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel);
903 : struct drm_bridge *drm_panel_bridge_add_typed(struct drm_panel *panel,
904 : u32 connector_type);
905 : void drm_panel_bridge_remove(struct drm_bridge *bridge);
906 : int drm_panel_bridge_set_orientation(struct drm_connector *connector,
907 : struct drm_bridge *bridge);
908 : struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
909 : struct drm_panel *panel);
910 : struct drm_bridge *devm_drm_panel_bridge_add_typed(struct device *dev,
911 : struct drm_panel *panel,
912 : u32 connector_type);
913 : struct drm_bridge *drmm_panel_bridge_add(struct drm_device *drm,
914 : struct drm_panel *panel);
915 : struct drm_connector *drm_panel_bridge_connector(struct drm_bridge *bridge);
916 : #else
917 : static inline bool drm_bridge_is_panel(const struct drm_bridge *bridge)
918 : {
919 : return false;
920 : }
921 :
922 : static inline int drm_panel_bridge_set_orientation(struct drm_connector *connector,
923 : struct drm_bridge *bridge)
924 : {
925 : return -EINVAL;
926 : }
927 : #endif
928 :
929 : #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL_BRIDGE)
930 : struct drm_bridge *devm_drm_of_get_bridge(struct device *dev, struct device_node *node,
931 : u32 port, u32 endpoint);
932 : struct drm_bridge *drmm_of_get_bridge(struct drm_device *drm, struct device_node *node,
933 : u32 port, u32 endpoint);
934 : #else
935 : static inline struct drm_bridge *devm_drm_of_get_bridge(struct device *dev,
936 : struct device_node *node,
937 : u32 port,
938 : u32 endpoint)
939 : {
940 : return ERR_PTR(-ENODEV);
941 : }
942 :
943 : static inline struct drm_bridge *drmm_of_get_bridge(struct drm_device *drm,
944 : struct device_node *node,
945 : u32 port,
946 : u32 endpoint)
947 : {
948 : return ERR_PTR(-ENODEV);
949 : }
950 : #endif
951 :
952 : #endif
|
