Line data Source code
1 : /*
2 : * Copyright (c) 2016 Intel Corporation
3 : *
4 : * Permission to use, copy, modify, distribute, and sell this software and its
5 : * documentation for any purpose is hereby granted without fee, provided that
6 : * the above copyright notice appear in all copies and that both that copyright
7 : * notice and this permission notice appear in supporting documentation, and
8 : * that the name of the copyright holders not be used in advertising or
9 : * publicity pertaining to distribution of the software without specific,
10 : * written prior permission. The copyright holders make no representations
11 : * about the suitability of this software for any purpose. It is provided "as
12 : * is" without express or implied warranty.
13 : *
14 : * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 : * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 : * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 : * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 : * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 : * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 : * OF THIS SOFTWARE.
21 : */
22 :
23 : #ifndef __DRM_PLANE_H__
24 : #define __DRM_PLANE_H__
25 :
26 : #include <linux/list.h>
27 : #include <linux/ctype.h>
28 : #include <drm/drm_mode_object.h>
29 : #include <drm/drm_color_mgmt.h>
30 : #include <drm/drm_rect.h>
31 : #include <drm/drm_modeset_lock.h>
32 : #include <drm/drm_util.h>
33 :
34 : struct drm_crtc;
35 : struct drm_printer;
36 : struct drm_modeset_acquire_ctx;
37 :
38 : enum drm_scaling_filter {
39 : DRM_SCALING_FILTER_DEFAULT,
40 : DRM_SCALING_FILTER_NEAREST_NEIGHBOR,
41 : };
42 :
43 : /**
44 : * struct drm_plane_state - mutable plane state
45 : *
46 : * Please note that the destination coordinates @crtc_x, @crtc_y, @crtc_h and
47 : * @crtc_w and the source coordinates @src_x, @src_y, @src_h and @src_w are the
48 : * raw coordinates provided by userspace. Drivers should use
49 : * drm_atomic_helper_check_plane_state() and only use the derived rectangles in
50 : * @src and @dst to program the hardware.
51 : */
52 : struct drm_plane_state {
53 : /** @plane: backpointer to the plane */
54 : struct drm_plane *plane;
55 :
56 : /**
57 : * @crtc:
58 : *
59 : * Currently bound CRTC, NULL if disabled. Do not this write directly,
60 : * use drm_atomic_set_crtc_for_plane()
61 : */
62 : struct drm_crtc *crtc;
63 :
64 : /**
65 : * @fb:
66 : *
67 : * Currently bound framebuffer. Do not write this directly, use
68 : * drm_atomic_set_fb_for_plane()
69 : */
70 : struct drm_framebuffer *fb;
71 :
72 : /**
73 : * @fence:
74 : *
75 : * Optional fence to wait for before scanning out @fb. The core atomic
76 : * code will set this when userspace is using explicit fencing. Do not
77 : * write this field directly for a driver's implicit fence.
78 : *
79 : * Drivers should store any implicit fence in this from their
80 : * &drm_plane_helper_funcs.prepare_fb callback. See
81 : * drm_gem_plane_helper_prepare_fb() for a suitable helper.
82 : */
83 : struct dma_fence *fence;
84 :
85 : /**
86 : * @crtc_x:
87 : *
88 : * Left position of visible portion of plane on crtc, signed dest
89 : * location allows it to be partially off screen.
90 : */
91 :
92 : int32_t crtc_x;
93 : /**
94 : * @crtc_y:
95 : *
96 : * Upper position of visible portion of plane on crtc, signed dest
97 : * location allows it to be partially off screen.
98 : */
99 : int32_t crtc_y;
100 :
101 : /** @crtc_w: width of visible portion of plane on crtc */
102 : /** @crtc_h: height of visible portion of plane on crtc */
103 : uint32_t crtc_w, crtc_h;
104 :
105 : /**
106 : * @src_x: left position of visible portion of plane within plane (in
107 : * 16.16 fixed point).
108 : */
109 : uint32_t src_x;
110 : /**
111 : * @src_y: upper position of visible portion of plane within plane (in
112 : * 16.16 fixed point).
113 : */
114 : uint32_t src_y;
115 : /** @src_w: width of visible portion of plane (in 16.16) */
116 : /** @src_h: height of visible portion of plane (in 16.16) */
117 : uint32_t src_h, src_w;
118 :
119 : /**
120 : * @alpha:
121 : * Opacity of the plane with 0 as completely transparent and 0xffff as
122 : * completely opaque. See drm_plane_create_alpha_property() for more
123 : * details.
124 : */
125 : u16 alpha;
126 :
127 : /**
128 : * @pixel_blend_mode:
129 : * The alpha blending equation selection, describing how the pixels from
130 : * the current plane are composited with the background. Value can be
131 : * one of DRM_MODE_BLEND_*
132 : */
133 : uint16_t pixel_blend_mode;
134 :
135 : /**
136 : * @rotation:
137 : * Rotation of the plane. See drm_plane_create_rotation_property() for
138 : * more details.
139 : */
140 : unsigned int rotation;
141 :
142 : /**
143 : * @zpos:
144 : * Priority of the given plane on crtc (optional).
145 : *
146 : * User-space may set mutable zpos properties so that multiple active
147 : * planes on the same CRTC have identical zpos values. This is a
148 : * user-space bug, but drivers can solve the conflict by comparing the
149 : * plane object IDs; the plane with a higher ID is stacked on top of a
150 : * plane with a lower ID.
151 : *
152 : * See drm_plane_create_zpos_property() and
153 : * drm_plane_create_zpos_immutable_property() for more details.
154 : */
155 : unsigned int zpos;
156 :
157 : /**
158 : * @normalized_zpos:
159 : * Normalized value of zpos: unique, range from 0 to N-1 where N is the
160 : * number of active planes for given crtc. Note that the driver must set
161 : * &drm_mode_config.normalize_zpos or call drm_atomic_normalize_zpos() to
162 : * update this before it can be trusted.
163 : */
164 : unsigned int normalized_zpos;
165 :
166 : /**
167 : * @color_encoding:
168 : *
169 : * Color encoding for non RGB formats
170 : */
171 : enum drm_color_encoding color_encoding;
172 :
173 : /**
174 : * @color_range:
175 : *
176 : * Color range for non RGB formats
177 : */
178 : enum drm_color_range color_range;
179 :
180 : /**
181 : * @fb_damage_clips:
182 : *
183 : * Blob representing damage (area in plane framebuffer that changed
184 : * since last plane update) as an array of &drm_mode_rect in framebuffer
185 : * coodinates of the attached framebuffer. Note that unlike plane src,
186 : * damage clips are not in 16.16 fixed point.
187 : *
188 : * See drm_plane_get_damage_clips() and
189 : * drm_plane_get_damage_clips_count() for accessing these.
190 : */
191 : struct drm_property_blob *fb_damage_clips;
192 :
193 : /**
194 : * @src:
195 : *
196 : * source coordinates of the plane (in 16.16).
197 : *
198 : * When using drm_atomic_helper_check_plane_state(),
199 : * the coordinates are clipped, but the driver may choose
200 : * to use unclipped coordinates instead when the hardware
201 : * performs the clipping automatically.
202 : */
203 : /**
204 : * @dst:
205 : *
206 : * clipped destination coordinates of the plane.
207 : *
208 : * When using drm_atomic_helper_check_plane_state(),
209 : * the coordinates are clipped, but the driver may choose
210 : * to use unclipped coordinates instead when the hardware
211 : * performs the clipping automatically.
212 : */
213 : struct drm_rect src, dst;
214 :
215 : /**
216 : * @visible:
217 : *
218 : * Visibility of the plane. This can be false even if fb!=NULL and
219 : * crtc!=NULL, due to clipping.
220 : */
221 : bool visible;
222 :
223 : /**
224 : * @scaling_filter:
225 : *
226 : * Scaling filter to be applied
227 : */
228 : enum drm_scaling_filter scaling_filter;
229 :
230 : /**
231 : * @commit: Tracks the pending commit to prevent use-after-free conditions,
232 : * and for async plane updates.
233 : *
234 : * May be NULL.
235 : */
236 : struct drm_crtc_commit *commit;
237 :
238 : /** @state: backpointer to global drm_atomic_state */
239 : struct drm_atomic_state *state;
240 : };
241 :
242 : static inline struct drm_rect
243 : drm_plane_state_src(const struct drm_plane_state *state)
244 : {
245 116 : struct drm_rect src = {
246 29 : .x1 = state->src_x,
247 29 : .y1 = state->src_y,
248 29 : .x2 = state->src_x + state->src_w,
249 29 : .y2 = state->src_y + state->src_h,
250 : };
251 : return src;
252 : }
253 :
254 : static inline struct drm_rect
255 : drm_plane_state_dest(const struct drm_plane_state *state)
256 : {
257 36 : struct drm_rect dest = {
258 : .x1 = state->crtc_x,
259 : .y1 = state->crtc_y,
260 12 : .x2 = state->crtc_x + state->crtc_w,
261 12 : .y2 = state->crtc_y + state->crtc_h,
262 : };
263 : return dest;
264 : }
265 :
266 : /**
267 : * struct drm_plane_funcs - driver plane control functions
268 : */
269 : struct drm_plane_funcs {
270 : /**
271 : * @update_plane:
272 : *
273 : * This is the legacy entry point to enable and configure the plane for
274 : * the given CRTC and framebuffer. It is never called to disable the
275 : * plane, i.e. the passed-in crtc and fb paramters are never NULL.
276 : *
277 : * The source rectangle in frame buffer memory coordinates is given by
278 : * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
279 : * values). Devices that don't support subpixel plane coordinates can
280 : * ignore the fractional part.
281 : *
282 : * The destination rectangle in CRTC coordinates is given by the
283 : * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
284 : * Devices scale the source rectangle to the destination rectangle. If
285 : * scaling is not supported, and the source rectangle size doesn't match
286 : * the destination rectangle size, the driver must return a
287 : * -<errorname>EINVAL</errorname> error.
288 : *
289 : * Drivers implementing atomic modeset should use
290 : * drm_atomic_helper_update_plane() to implement this hook.
291 : *
292 : * RETURNS:
293 : *
294 : * 0 on success or a negative error code on failure.
295 : */
296 : int (*update_plane)(struct drm_plane *plane,
297 : struct drm_crtc *crtc, struct drm_framebuffer *fb,
298 : int crtc_x, int crtc_y,
299 : unsigned int crtc_w, unsigned int crtc_h,
300 : uint32_t src_x, uint32_t src_y,
301 : uint32_t src_w, uint32_t src_h,
302 : struct drm_modeset_acquire_ctx *ctx);
303 :
304 : /**
305 : * @disable_plane:
306 : *
307 : * This is the legacy entry point to disable the plane. The DRM core
308 : * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
309 : * with the frame buffer ID set to 0. Disabled planes must not be
310 : * processed by the CRTC.
311 : *
312 : * Drivers implementing atomic modeset should use
313 : * drm_atomic_helper_disable_plane() to implement this hook.
314 : *
315 : * RETURNS:
316 : *
317 : * 0 on success or a negative error code on failure.
318 : */
319 : int (*disable_plane)(struct drm_plane *plane,
320 : struct drm_modeset_acquire_ctx *ctx);
321 :
322 : /**
323 : * @destroy:
324 : *
325 : * Clean up plane resources. This is only called at driver unload time
326 : * through drm_mode_config_cleanup() since a plane cannot be hotplugged
327 : * in DRM.
328 : */
329 : void (*destroy)(struct drm_plane *plane);
330 :
331 : /**
332 : * @reset:
333 : *
334 : * Reset plane hardware and software state to off. This function isn't
335 : * called by the core directly, only through drm_mode_config_reset().
336 : * It's not a helper hook only for historical reasons.
337 : *
338 : * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
339 : * atomic state using this hook.
340 : */
341 : void (*reset)(struct drm_plane *plane);
342 :
343 : /**
344 : * @set_property:
345 : *
346 : * This is the legacy entry point to update a property attached to the
347 : * plane.
348 : *
349 : * This callback is optional if the driver does not support any legacy
350 : * driver-private properties. For atomic drivers it is not used because
351 : * property handling is done entirely in the DRM core.
352 : *
353 : * RETURNS:
354 : *
355 : * 0 on success or a negative error code on failure.
356 : */
357 : int (*set_property)(struct drm_plane *plane,
358 : struct drm_property *property, uint64_t val);
359 :
360 : /**
361 : * @atomic_duplicate_state:
362 : *
363 : * Duplicate the current atomic state for this plane and return it.
364 : * The core and helpers guarantee that any atomic state duplicated with
365 : * this hook and still owned by the caller (i.e. not transferred to the
366 : * driver by calling &drm_mode_config_funcs.atomic_commit) will be
367 : * cleaned up by calling the @atomic_destroy_state hook in this
368 : * structure.
369 : *
370 : * This callback is mandatory for atomic drivers.
371 : *
372 : * Atomic drivers which don't subclass &struct drm_plane_state should use
373 : * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
374 : * state structure to extend it with driver-private state should use
375 : * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
376 : * duplicated in a consistent fashion across drivers.
377 : *
378 : * It is an error to call this hook before &drm_plane.state has been
379 : * initialized correctly.
380 : *
381 : * NOTE:
382 : *
383 : * If the duplicate state references refcounted resources this hook must
384 : * acquire a reference for each of them. The driver must release these
385 : * references again in @atomic_destroy_state.
386 : *
387 : * RETURNS:
388 : *
389 : * Duplicated atomic state or NULL when the allocation failed.
390 : */
391 : struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
392 :
393 : /**
394 : * @atomic_destroy_state:
395 : *
396 : * Destroy a state duplicated with @atomic_duplicate_state and release
397 : * or unreference all resources it references
398 : *
399 : * This callback is mandatory for atomic drivers.
400 : */
401 : void (*atomic_destroy_state)(struct drm_plane *plane,
402 : struct drm_plane_state *state);
403 :
404 : /**
405 : * @atomic_set_property:
406 : *
407 : * Decode a driver-private property value and store the decoded value
408 : * into the passed-in state structure. Since the atomic core decodes all
409 : * standardized properties (even for extensions beyond the core set of
410 : * properties which might not be implemented by all drivers) this
411 : * requires drivers to subclass the state structure.
412 : *
413 : * Such driver-private properties should really only be implemented for
414 : * truly hardware/vendor specific state. Instead it is preferred to
415 : * standardize atomic extension and decode the properties used to expose
416 : * such an extension in the core.
417 : *
418 : * Do not call this function directly, use
419 : * drm_atomic_plane_set_property() instead.
420 : *
421 : * This callback is optional if the driver does not support any
422 : * driver-private atomic properties.
423 : *
424 : * NOTE:
425 : *
426 : * This function is called in the state assembly phase of atomic
427 : * modesets, which can be aborted for any reason (including on
428 : * userspace's request to just check whether a configuration would be
429 : * possible). Drivers MUST NOT touch any persistent state (hardware or
430 : * software) or data structures except the passed in @state parameter.
431 : *
432 : * Also since userspace controls in which order properties are set this
433 : * function must not do any input validation (since the state update is
434 : * incomplete and hence likely inconsistent). Instead any such input
435 : * validation must be done in the various atomic_check callbacks.
436 : *
437 : * RETURNS:
438 : *
439 : * 0 if the property has been found, -EINVAL if the property isn't
440 : * implemented by the driver (which shouldn't ever happen, the core only
441 : * asks for properties attached to this plane). No other validation is
442 : * allowed by the driver. The core already checks that the property
443 : * value is within the range (integer, valid enum value, ...) the driver
444 : * set when registering the property.
445 : */
446 : int (*atomic_set_property)(struct drm_plane *plane,
447 : struct drm_plane_state *state,
448 : struct drm_property *property,
449 : uint64_t val);
450 :
451 : /**
452 : * @atomic_get_property:
453 : *
454 : * Reads out the decoded driver-private property. This is used to
455 : * implement the GETPLANE IOCTL.
456 : *
457 : * Do not call this function directly, use
458 : * drm_atomic_plane_get_property() instead.
459 : *
460 : * This callback is optional if the driver does not support any
461 : * driver-private atomic properties.
462 : *
463 : * RETURNS:
464 : *
465 : * 0 on success, -EINVAL if the property isn't implemented by the
466 : * driver (which should never happen, the core only asks for
467 : * properties attached to this plane).
468 : */
469 : int (*atomic_get_property)(struct drm_plane *plane,
470 : const struct drm_plane_state *state,
471 : struct drm_property *property,
472 : uint64_t *val);
473 : /**
474 : * @late_register:
475 : *
476 : * This optional hook can be used to register additional userspace
477 : * interfaces attached to the plane like debugfs interfaces.
478 : * It is called late in the driver load sequence from drm_dev_register().
479 : * Everything added from this callback should be unregistered in
480 : * the early_unregister callback.
481 : *
482 : * Returns:
483 : *
484 : * 0 on success, or a negative error code on failure.
485 : */
486 : int (*late_register)(struct drm_plane *plane);
487 :
488 : /**
489 : * @early_unregister:
490 : *
491 : * This optional hook should be used to unregister the additional
492 : * userspace interfaces attached to the plane from
493 : * @late_register. It is called from drm_dev_unregister(),
494 : * early in the driver unload sequence to disable userspace access
495 : * before data structures are torndown.
496 : */
497 : void (*early_unregister)(struct drm_plane *plane);
498 :
499 : /**
500 : * @atomic_print_state:
501 : *
502 : * If driver subclasses &struct drm_plane_state, it should implement
503 : * this optional hook for printing additional driver specific state.
504 : *
505 : * Do not call this directly, use drm_atomic_plane_print_state()
506 : * instead.
507 : */
508 : void (*atomic_print_state)(struct drm_printer *p,
509 : const struct drm_plane_state *state);
510 :
511 : /**
512 : * @format_mod_supported:
513 : *
514 : * This optional hook is used for the DRM to determine if the given
515 : * format/modifier combination is valid for the plane. This allows the
516 : * DRM to generate the correct format bitmask (which formats apply to
517 : * which modifier), and to validate modifiers at atomic_check time.
518 : *
519 : * If not present, then any modifier in the plane's modifier
520 : * list is allowed with any of the plane's formats.
521 : *
522 : * Returns:
523 : *
524 : * True if the given modifier is valid for that format on the plane.
525 : * False otherwise.
526 : */
527 : bool (*format_mod_supported)(struct drm_plane *plane, uint32_t format,
528 : uint64_t modifier);
529 : };
530 :
531 : /**
532 : * enum drm_plane_type - uapi plane type enumeration
533 : *
534 : * For historical reasons not all planes are made the same. This enumeration is
535 : * used to tell the different types of planes apart to implement the different
536 : * uapi semantics for them. For userspace which is universal plane aware and
537 : * which is using that atomic IOCTL there's no difference between these planes
538 : * (beyong what the driver and hardware can support of course).
539 : *
540 : * For compatibility with legacy userspace, only overlay planes are made
541 : * available to userspace by default. Userspace clients may set the
542 : * &DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate that they
543 : * wish to receive a universal plane list containing all plane types. See also
544 : * drm_for_each_legacy_plane().
545 : *
546 : * In addition to setting each plane's type, drivers need to setup the
547 : * &drm_crtc.primary and optionally &drm_crtc.cursor pointers for legacy
548 : * IOCTLs. See drm_crtc_init_with_planes().
549 : *
550 : * WARNING: The values of this enum is UABI since they're exposed in the "type"
551 : * property.
552 : */
553 : enum drm_plane_type {
554 : /**
555 : * @DRM_PLANE_TYPE_OVERLAY:
556 : *
557 : * Overlay planes represent all non-primary, non-cursor planes. Some
558 : * drivers refer to these types of planes as "sprites" internally.
559 : */
560 : DRM_PLANE_TYPE_OVERLAY,
561 :
562 : /**
563 : * @DRM_PLANE_TYPE_PRIMARY:
564 : *
565 : * A primary plane attached to a CRTC is the most likely to be able to
566 : * light up the CRTC when no scaling/cropping is used and the plane
567 : * covers the whole CRTC.
568 : */
569 : DRM_PLANE_TYPE_PRIMARY,
570 :
571 : /**
572 : * @DRM_PLANE_TYPE_CURSOR:
573 : *
574 : * A cursor plane attached to a CRTC is more likely to be able to be
575 : * enabled when no scaling/cropping is used and the framebuffer has the
576 : * size indicated by &drm_mode_config.cursor_width and
577 : * &drm_mode_config.cursor_height. Additionally, if the driver doesn't
578 : * support modifiers, the framebuffer should have a linear layout.
579 : */
580 : DRM_PLANE_TYPE_CURSOR,
581 : };
582 :
583 :
584 : /**
585 : * struct drm_plane - central DRM plane control structure
586 : *
587 : * Planes represent the scanout hardware of a display block. They receive their
588 : * input data from a &drm_framebuffer and feed it to a &drm_crtc. Planes control
589 : * the color conversion, see `Plane Composition Properties`_ for more details,
590 : * and are also involved in the color conversion of input pixels, see `Color
591 : * Management Properties`_ for details on that.
592 : */
593 : struct drm_plane {
594 : /** @dev: DRM device this plane belongs to */
595 : struct drm_device *dev;
596 :
597 : /**
598 : * @head:
599 : *
600 : * List of all planes on @dev, linked from &drm_mode_config.plane_list.
601 : * Invariant over the lifetime of @dev and therefore does not need
602 : * locking.
603 : */
604 : struct list_head head;
605 :
606 : /** @name: human readable name, can be overwritten by the driver */
607 : char *name;
608 :
609 : /**
610 : * @mutex:
611 : *
612 : * Protects modeset plane state, together with the &drm_crtc.mutex of
613 : * CRTC this plane is linked to (when active, getting activated or
614 : * getting disabled).
615 : *
616 : * For atomic drivers specifically this protects @state.
617 : */
618 : struct drm_modeset_lock mutex;
619 :
620 : /** @base: base mode object */
621 : struct drm_mode_object base;
622 :
623 : /**
624 : * @possible_crtcs: pipes this plane can be bound to constructed from
625 : * drm_crtc_mask()
626 : */
627 : uint32_t possible_crtcs;
628 : /** @format_types: array of formats supported by this plane */
629 : uint32_t *format_types;
630 : /** @format_count: Size of the array pointed at by @format_types. */
631 : unsigned int format_count;
632 : /**
633 : * @format_default: driver hasn't supplied supported formats for the
634 : * plane. Used by the non-atomic driver compatibility wrapper only.
635 : */
636 : bool format_default;
637 :
638 : /** @modifiers: array of modifiers supported by this plane */
639 : uint64_t *modifiers;
640 : /** @modifier_count: Size of the array pointed at by @modifier_count. */
641 : unsigned int modifier_count;
642 :
643 : /**
644 : * @crtc:
645 : *
646 : * Currently bound CRTC, only meaningful for non-atomic drivers. For
647 : * atomic drivers this is forced to be NULL, atomic drivers should
648 : * instead check &drm_plane_state.crtc.
649 : */
650 : struct drm_crtc *crtc;
651 :
652 : /**
653 : * @fb:
654 : *
655 : * Currently bound framebuffer, only meaningful for non-atomic drivers.
656 : * For atomic drivers this is forced to be NULL, atomic drivers should
657 : * instead check &drm_plane_state.fb.
658 : */
659 : struct drm_framebuffer *fb;
660 :
661 : /**
662 : * @old_fb:
663 : *
664 : * Temporary tracking of the old fb while a modeset is ongoing. Only
665 : * used by non-atomic drivers, forced to be NULL for atomic drivers.
666 : */
667 : struct drm_framebuffer *old_fb;
668 :
669 : /** @funcs: plane control functions */
670 : const struct drm_plane_funcs *funcs;
671 :
672 : /** @properties: property tracking for this plane */
673 : struct drm_object_properties properties;
674 :
675 : /** @type: Type of plane, see &enum drm_plane_type for details. */
676 : enum drm_plane_type type;
677 :
678 : /**
679 : * @index: Position inside the mode_config.list, can be used as an array
680 : * index. It is invariant over the lifetime of the plane.
681 : */
682 : unsigned index;
683 :
684 : /** @helper_private: mid-layer private data */
685 : const struct drm_plane_helper_funcs *helper_private;
686 :
687 : /**
688 : * @state:
689 : *
690 : * Current atomic state for this plane.
691 : *
692 : * This is protected by @mutex. Note that nonblocking atomic commits
693 : * access the current plane state without taking locks. Either by going
694 : * through the &struct drm_atomic_state pointers, see
695 : * for_each_oldnew_plane_in_state(), for_each_old_plane_in_state() and
696 : * for_each_new_plane_in_state(). Or through careful ordering of atomic
697 : * commit operations as implemented in the atomic helpers, see
698 : * &struct drm_crtc_commit.
699 : */
700 : struct drm_plane_state *state;
701 :
702 : /**
703 : * @alpha_property:
704 : * Optional alpha property for this plane. See
705 : * drm_plane_create_alpha_property().
706 : */
707 : struct drm_property *alpha_property;
708 : /**
709 : * @zpos_property:
710 : * Optional zpos property for this plane. See
711 : * drm_plane_create_zpos_property().
712 : */
713 : struct drm_property *zpos_property;
714 : /**
715 : * @rotation_property:
716 : * Optional rotation property for this plane. See
717 : * drm_plane_create_rotation_property().
718 : */
719 : struct drm_property *rotation_property;
720 : /**
721 : * @blend_mode_property:
722 : * Optional "pixel blend mode" enum property for this plane.
723 : * Blend mode property represents the alpha blending equation selection,
724 : * describing how the pixels from the current plane are composited with
725 : * the background.
726 : */
727 : struct drm_property *blend_mode_property;
728 :
729 : /**
730 : * @color_encoding_property:
731 : *
732 : * Optional "COLOR_ENCODING" enum property for specifying
733 : * color encoding for non RGB formats.
734 : * See drm_plane_create_color_properties().
735 : */
736 : struct drm_property *color_encoding_property;
737 : /**
738 : * @color_range_property:
739 : *
740 : * Optional "COLOR_RANGE" enum property for specifying
741 : * color range for non RGB formats.
742 : * See drm_plane_create_color_properties().
743 : */
744 : struct drm_property *color_range_property;
745 :
746 : /**
747 : * @scaling_filter_property: property to apply a particular filter while
748 : * scaling.
749 : */
750 : struct drm_property *scaling_filter_property;
751 : };
752 :
753 : #define obj_to_plane(x) container_of(x, struct drm_plane, base)
754 :
755 : __printf(9, 10)
756 : int drm_universal_plane_init(struct drm_device *dev,
757 : struct drm_plane *plane,
758 : uint32_t possible_crtcs,
759 : const struct drm_plane_funcs *funcs,
760 : const uint32_t *formats,
761 : unsigned int format_count,
762 : const uint64_t *format_modifiers,
763 : enum drm_plane_type type,
764 : const char *name, ...);
765 : void drm_plane_cleanup(struct drm_plane *plane);
766 :
767 : __printf(10, 11)
768 : void *__drmm_universal_plane_alloc(struct drm_device *dev,
769 : size_t size, size_t offset,
770 : uint32_t possible_crtcs,
771 : const struct drm_plane_funcs *funcs,
772 : const uint32_t *formats,
773 : unsigned int format_count,
774 : const uint64_t *format_modifiers,
775 : enum drm_plane_type plane_type,
776 : const char *name, ...);
777 :
778 : /**
779 : * drmm_universal_plane_alloc - Allocate and initialize an universal plane object
780 : * @dev: DRM device
781 : * @type: the type of the struct which contains struct &drm_plane
782 : * @member: the name of the &drm_plane within @type
783 : * @possible_crtcs: bitmask of possible CRTCs
784 : * @funcs: callbacks for the new plane
785 : * @formats: array of supported formats (DRM_FORMAT\_\*)
786 : * @format_count: number of elements in @formats
787 : * @format_modifiers: array of struct drm_format modifiers terminated by
788 : * DRM_FORMAT_MOD_INVALID
789 : * @plane_type: type of plane (overlay, primary, cursor)
790 : * @name: printf style format string for the plane name, or NULL for default name
791 : *
792 : * Allocates and initializes a plane object of type @type. Cleanup is
793 : * automatically handled through registering drm_plane_cleanup() with
794 : * drmm_add_action().
795 : *
796 : * The @drm_plane_funcs.destroy hook must be NULL.
797 : *
798 : * Drivers that only support the DRM_FORMAT_MOD_LINEAR modifier support may set
799 : * @format_modifiers to NULL. The plane will advertise the linear modifier.
800 : *
801 : * Returns:
802 : * Pointer to new plane, or ERR_PTR on failure.
803 : */
804 : #define drmm_universal_plane_alloc(dev, type, member, possible_crtcs, funcs, formats, \
805 : format_count, format_modifiers, plane_type, name, ...) \
806 : ((type *)__drmm_universal_plane_alloc(dev, sizeof(type), \
807 : offsetof(type, member), \
808 : possible_crtcs, funcs, formats, \
809 : format_count, format_modifiers, \
810 : plane_type, name, ##__VA_ARGS__))
811 :
812 : __printf(10, 11)
813 : void *__drm_universal_plane_alloc(struct drm_device *dev,
814 : size_t size, size_t offset,
815 : uint32_t possible_crtcs,
816 : const struct drm_plane_funcs *funcs,
817 : const uint32_t *formats,
818 : unsigned int format_count,
819 : const uint64_t *format_modifiers,
820 : enum drm_plane_type plane_type,
821 : const char *name, ...);
822 :
823 : /**
824 : * drm_universal_plane_alloc() - Allocate and initialize an universal plane object
825 : * @dev: DRM device
826 : * @type: the type of the struct which contains struct &drm_plane
827 : * @member: the name of the &drm_plane within @type
828 : * @possible_crtcs: bitmask of possible CRTCs
829 : * @funcs: callbacks for the new plane
830 : * @formats: array of supported formats (DRM_FORMAT\_\*)
831 : * @format_count: number of elements in @formats
832 : * @format_modifiers: array of struct drm_format modifiers terminated by
833 : * DRM_FORMAT_MOD_INVALID
834 : * @plane_type: type of plane (overlay, primary, cursor)
835 : * @name: printf style format string for the plane name, or NULL for default name
836 : *
837 : * Allocates and initializes a plane object of type @type. The caller
838 : * is responsible for releasing the allocated memory with kfree().
839 : *
840 : * Drivers are encouraged to use drmm_universal_plane_alloc() instead.
841 : *
842 : * Drivers that only support the DRM_FORMAT_MOD_LINEAR modifier support may set
843 : * @format_modifiers to NULL. The plane will advertise the linear modifier.
844 : *
845 : * Returns:
846 : * Pointer to new plane, or ERR_PTR on failure.
847 : */
848 : #define drm_universal_plane_alloc(dev, type, member, possible_crtcs, funcs, formats, \
849 : format_count, format_modifiers, plane_type, name, ...) \
850 : ((type *)__drm_universal_plane_alloc(dev, sizeof(type), \
851 : offsetof(type, member), \
852 : possible_crtcs, funcs, formats, \
853 : format_count, format_modifiers, \
854 : plane_type, name, ##__VA_ARGS__))
855 :
856 : /**
857 : * drm_plane_index - find the index of a registered plane
858 : * @plane: plane to find index for
859 : *
860 : * Given a registered plane, return the index of that plane within a DRM
861 : * device's list of planes.
862 : */
863 : static inline unsigned int drm_plane_index(const struct drm_plane *plane)
864 : {
865 : return plane->index;
866 : }
867 :
868 : /**
869 : * drm_plane_mask - find the mask of a registered plane
870 : * @plane: plane to find mask for
871 : */
872 : static inline u32 drm_plane_mask(const struct drm_plane *plane)
873 : {
874 0 : return 1 << drm_plane_index(plane);
875 : }
876 :
877 : struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
878 : void drm_plane_force_disable(struct drm_plane *plane);
879 :
880 : int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
881 : struct drm_property *property,
882 : uint64_t value);
883 :
884 : /**
885 : * drm_plane_find - find a &drm_plane
886 : * @dev: DRM device
887 : * @file_priv: drm file to check for lease against.
888 : * @id: plane id
889 : *
890 : * Returns the plane with @id, NULL if it doesn't exist. Simple wrapper around
891 : * drm_mode_object_find().
892 : */
893 : static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
894 : struct drm_file *file_priv,
895 : uint32_t id)
896 : {
897 : struct drm_mode_object *mo;
898 0 : mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_PLANE);
899 0 : return mo ? obj_to_plane(mo) : NULL;
900 : }
901 :
902 : /**
903 : * drm_for_each_plane_mask - iterate over planes specified by bitmask
904 : * @plane: the loop cursor
905 : * @dev: the DRM device
906 : * @plane_mask: bitmask of plane indices
907 : *
908 : * Iterate over all planes specified by bitmask.
909 : */
910 : #define drm_for_each_plane_mask(plane, dev, plane_mask) \
911 : list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
912 : for_each_if ((plane_mask) & drm_plane_mask(plane))
913 :
914 : /**
915 : * drm_for_each_legacy_plane - iterate over all planes for legacy userspace
916 : * @plane: the loop cursor
917 : * @dev: the DRM device
918 : *
919 : * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
920 : * This is useful for implementing userspace apis when userspace is not
921 : * universal plane aware. See also &enum drm_plane_type.
922 : */
923 : #define drm_for_each_legacy_plane(plane, dev) \
924 : list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
925 : for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
926 :
927 : /**
928 : * drm_for_each_plane - iterate over all planes
929 : * @plane: the loop cursor
930 : * @dev: the DRM device
931 : *
932 : * Iterate over all planes of @dev, include primary and cursor planes.
933 : */
934 : #define drm_for_each_plane(plane, dev) \
935 : list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
936 :
937 : bool drm_any_plane_has_format(struct drm_device *dev,
938 : u32 format, u64 modifier);
939 :
940 : void drm_plane_enable_fb_damage_clips(struct drm_plane *plane);
941 : unsigned int
942 : drm_plane_get_damage_clips_count(const struct drm_plane_state *state);
943 : struct drm_mode_rect *
944 : drm_plane_get_damage_clips(const struct drm_plane_state *state);
945 :
946 : int drm_plane_create_scaling_filter_property(struct drm_plane *plane,
947 : unsigned int supported_filters);
948 :
949 : #endif
|
