Line data Source code
1 : // SPDX-License-Identifier: GPL-2.0
2 :
3 : /*
4 : * Generic wait-for-completion handler;
5 : *
6 : * It differs from semaphores in that their default case is the opposite,
7 : * wait_for_completion default blocks whereas semaphore default non-block. The
8 : * interface also makes it easy to 'complete' multiple waiting threads,
9 : * something which isn't entirely natural for semaphores.
10 : *
11 : * But more importantly, the primitive documents the usage. Semaphores would
12 : * typically be used for exclusion which gives rise to priority inversion.
13 : * Waiting for completion is a typically sync point, but not an exclusion point.
14 : */
15 :
16 : /**
17 : * complete: - signals a single thread waiting on this completion
18 : * @x: holds the state of this particular completion
19 : *
20 : * This will wake up a single thread waiting on this completion. Threads will be
21 : * awakened in the same order in which they were queued.
22 : *
23 : * See also complete_all(), wait_for_completion() and related routines.
24 : *
25 : * If this function wakes up a task, it executes a full memory barrier before
26 : * accessing the task state.
27 : */
28 1016 : void complete(struct completion *x)
29 : {
30 : unsigned long flags;
31 :
32 1016 : raw_spin_lock_irqsave(&x->wait.lock, flags);
33 :
34 1016 : if (x->done != UINT_MAX)
35 1016 : x->done++;
36 1016 : swake_up_locked(&x->wait);
37 2032 : raw_spin_unlock_irqrestore(&x->wait.lock, flags);
38 1016 : }
39 : EXPORT_SYMBOL(complete);
40 :
41 : /**
42 : * complete_all: - signals all threads waiting on this completion
43 : * @x: holds the state of this particular completion
44 : *
45 : * This will wake up all threads waiting on this particular completion event.
46 : *
47 : * If this function wakes up a task, it executes a full memory barrier before
48 : * accessing the task state.
49 : *
50 : * Since complete_all() sets the completion of @x permanently to done
51 : * to allow multiple waiters to finish, a call to reinit_completion()
52 : * must be used on @x if @x is to be used again. The code must make
53 : * sure that all waiters have woken and finished before reinitializing
54 : * @x. Also note that the function completion_done() can not be used
55 : * to know if there are still waiters after complete_all() has been called.
56 : */
57 588 : void complete_all(struct completion *x)
58 : {
59 : unsigned long flags;
60 :
61 : lockdep_assert_RT_in_threaded_ctx();
62 :
63 588 : raw_spin_lock_irqsave(&x->wait.lock, flags);
64 588 : x->done = UINT_MAX;
65 1176 : swake_up_all_locked(&x->wait);
66 1176 : raw_spin_unlock_irqrestore(&x->wait.lock, flags);
67 588 : }
68 : EXPORT_SYMBOL(complete_all);
69 :
70 : static inline long __sched
71 683 : do_wait_for_common(struct completion *x,
72 : long (*action)(long), long timeout, int state)
73 : {
74 683 : if (!x->done) {
75 683 : DECLARE_SWAITQUEUE(wait);
76 :
77 : do {
78 683 : if (signal_pending_state(state, current)) {
79 : timeout = -ERESTARTSYS;
80 : break;
81 : }
82 1366 : __prepare_to_swait(&x->wait, &wait);
83 683 : __set_current_state(state);
84 683 : raw_spin_unlock_irq(&x->wait.lock);
85 683 : timeout = action(timeout);
86 683 : raw_spin_lock_irq(&x->wait.lock);
87 683 : } while (!x->done && timeout);
88 1366 : __finish_swait(&x->wait, &wait);
89 683 : if (!x->done)
90 0 : return timeout;
91 : }
92 683 : if (x->done != UINT_MAX)
93 683 : x->done--;
94 683 : return timeout ?: 1;
95 : }
96 :
97 : static inline long __sched
98 : __wait_for_common(struct completion *x,
99 : long (*action)(long), long timeout, int state)
100 : {
101 : might_sleep();
102 :
103 683 : complete_acquire(x);
104 :
105 683 : raw_spin_lock_irq(&x->wait.lock);
106 683 : timeout = do_wait_for_common(x, action, timeout, state);
107 683 : raw_spin_unlock_irq(&x->wait.lock);
108 :
109 683 : complete_release(x);
110 :
111 : return timeout;
112 : }
113 :
114 : static long __sched
115 4 : wait_for_common(struct completion *x, long timeout, int state)
116 : {
117 683 : return __wait_for_common(x, schedule_timeout, timeout, state);
118 : }
119 :
120 : static long __sched
121 0 : wait_for_common_io(struct completion *x, long timeout, int state)
122 : {
123 0 : return __wait_for_common(x, io_schedule_timeout, timeout, state);
124 : }
125 :
126 : /**
127 : * wait_for_completion: - waits for completion of a task
128 : * @x: holds the state of this particular completion
129 : *
130 : * This waits to be signaled for completion of a specific task. It is NOT
131 : * interruptible and there is no timeout.
132 : *
133 : * See also similar routines (i.e. wait_for_completion_timeout()) with timeout
134 : * and interrupt capability. Also see complete().
135 : */
136 4 : void __sched wait_for_completion(struct completion *x)
137 : {
138 4 : wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
139 4 : }
140 : EXPORT_SYMBOL(wait_for_completion);
141 :
142 : /**
143 : * wait_for_completion_timeout: - waits for completion of a task (w/timeout)
144 : * @x: holds the state of this particular completion
145 : * @timeout: timeout value in jiffies
146 : *
147 : * This waits for either a completion of a specific task to be signaled or for a
148 : * specified timeout to expire. The timeout is in jiffies. It is not
149 : * interruptible.
150 : *
151 : * Return: 0 if timed out, and positive (at least 1, or number of jiffies left
152 : * till timeout) if completed.
153 : */
154 : unsigned long __sched
155 333 : wait_for_completion_timeout(struct completion *x, unsigned long timeout)
156 : {
157 666 : return wait_for_common(x, timeout, TASK_UNINTERRUPTIBLE);
158 : }
159 : EXPORT_SYMBOL(wait_for_completion_timeout);
160 :
161 : /**
162 : * wait_for_completion_io: - waits for completion of a task
163 : * @x: holds the state of this particular completion
164 : *
165 : * This waits to be signaled for completion of a specific task. It is NOT
166 : * interruptible and there is no timeout. The caller is accounted as waiting
167 : * for IO (which traditionally means blkio only).
168 : */
169 0 : void __sched wait_for_completion_io(struct completion *x)
170 : {
171 0 : wait_for_common_io(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
172 0 : }
173 : EXPORT_SYMBOL(wait_for_completion_io);
174 :
175 : /**
176 : * wait_for_completion_io_timeout: - waits for completion of a task (w/timeout)
177 : * @x: holds the state of this particular completion
178 : * @timeout: timeout value in jiffies
179 : *
180 : * This waits for either a completion of a specific task to be signaled or for a
181 : * specified timeout to expire. The timeout is in jiffies. It is not
182 : * interruptible. The caller is accounted as waiting for IO (which traditionally
183 : * means blkio only).
184 : *
185 : * Return: 0 if timed out, and positive (at least 1, or number of jiffies left
186 : * till timeout) if completed.
187 : */
188 : unsigned long __sched
189 0 : wait_for_completion_io_timeout(struct completion *x, unsigned long timeout)
190 : {
191 0 : return wait_for_common_io(x, timeout, TASK_UNINTERRUPTIBLE);
192 : }
193 : EXPORT_SYMBOL(wait_for_completion_io_timeout);
194 :
195 : /**
196 : * wait_for_completion_interruptible: - waits for completion of a task (w/intr)
197 : * @x: holds the state of this particular completion
198 : *
199 : * This waits for completion of a specific task to be signaled. It is
200 : * interruptible.
201 : *
202 : * Return: -ERESTARTSYS if interrupted, 0 if completed.
203 : */
204 0 : int __sched wait_for_completion_interruptible(struct completion *x)
205 : {
206 0 : long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_INTERRUPTIBLE);
207 :
208 0 : if (t == -ERESTARTSYS)
209 0 : return t;
210 : return 0;
211 : }
212 : EXPORT_SYMBOL(wait_for_completion_interruptible);
213 :
214 : /**
215 : * wait_for_completion_interruptible_timeout: - waits for completion (w/(to,intr))
216 : * @x: holds the state of this particular completion
217 : * @timeout: timeout value in jiffies
218 : *
219 : * This waits for either a completion of a specific task to be signaled or for a
220 : * specified timeout to expire. It is interruptible. The timeout is in jiffies.
221 : *
222 : * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1,
223 : * or number of jiffies left till timeout) if completed.
224 : */
225 : long __sched
226 0 : wait_for_completion_interruptible_timeout(struct completion *x,
227 : unsigned long timeout)
228 : {
229 0 : return wait_for_common(x, timeout, TASK_INTERRUPTIBLE);
230 : }
231 : EXPORT_SYMBOL(wait_for_completion_interruptible_timeout);
232 :
233 : /**
234 : * wait_for_completion_killable: - waits for completion of a task (killable)
235 : * @x: holds the state of this particular completion
236 : *
237 : * This waits to be signaled for completion of a specific task. It can be
238 : * interrupted by a kill signal.
239 : *
240 : * Return: -ERESTARTSYS if interrupted, 0 if completed.
241 : */
242 346 : int __sched wait_for_completion_killable(struct completion *x)
243 : {
244 346 : long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_KILLABLE);
245 :
246 346 : if (t == -ERESTARTSYS)
247 0 : return t;
248 : return 0;
249 : }
250 : EXPORT_SYMBOL(wait_for_completion_killable);
251 :
252 0 : int __sched wait_for_completion_state(struct completion *x, unsigned int state)
253 : {
254 0 : long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, state);
255 :
256 0 : if (t == -ERESTARTSYS)
257 0 : return t;
258 : return 0;
259 : }
260 : EXPORT_SYMBOL(wait_for_completion_state);
261 :
262 : /**
263 : * wait_for_completion_killable_timeout: - waits for completion of a task (w/(to,killable))
264 : * @x: holds the state of this particular completion
265 : * @timeout: timeout value in jiffies
266 : *
267 : * This waits for either a completion of a specific task to be
268 : * signaled or for a specified timeout to expire. It can be
269 : * interrupted by a kill signal. The timeout is in jiffies.
270 : *
271 : * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1,
272 : * or number of jiffies left till timeout) if completed.
273 : */
274 : long __sched
275 0 : wait_for_completion_killable_timeout(struct completion *x,
276 : unsigned long timeout)
277 : {
278 0 : return wait_for_common(x, timeout, TASK_KILLABLE);
279 : }
280 : EXPORT_SYMBOL(wait_for_completion_killable_timeout);
281 :
282 : /**
283 : * try_wait_for_completion - try to decrement a completion without blocking
284 : * @x: completion structure
285 : *
286 : * Return: 0 if a decrement cannot be done without blocking
287 : * 1 if a decrement succeeded.
288 : *
289 : * If a completion is being used as a counting completion,
290 : * attempt to decrement the counter without blocking. This
291 : * enables us to avoid waiting if the resource the completion
292 : * is protecting is not available.
293 : */
294 0 : bool try_wait_for_completion(struct completion *x)
295 : {
296 : unsigned long flags;
297 0 : bool ret = true;
298 :
299 : /*
300 : * Since x->done will need to be locked only
301 : * in the non-blocking case, we check x->done
302 : * first without taking the lock so we can
303 : * return early in the blocking case.
304 : */
305 0 : if (!READ_ONCE(x->done))
306 : return false;
307 :
308 0 : raw_spin_lock_irqsave(&x->wait.lock, flags);
309 0 : if (!x->done)
310 : ret = false;
311 0 : else if (x->done != UINT_MAX)
312 0 : x->done--;
313 0 : raw_spin_unlock_irqrestore(&x->wait.lock, flags);
314 0 : return ret;
315 : }
316 : EXPORT_SYMBOL(try_wait_for_completion);
317 :
318 : /**
319 : * completion_done - Test to see if a completion has any waiters
320 : * @x: completion structure
321 : *
322 : * Return: 0 if there are waiters (wait_for_completion() in progress)
323 : * 1 if there are no waiters.
324 : *
325 : * Note, this will always return true if complete_all() was called on @X.
326 : */
327 0 : bool completion_done(struct completion *x)
328 : {
329 : unsigned long flags;
330 :
331 0 : if (!READ_ONCE(x->done))
332 : return false;
333 :
334 : /*
335 : * If ->done, we need to wait for complete() to release ->wait.lock
336 : * otherwise we can end up freeing the completion before complete()
337 : * is done referencing it.
338 : */
339 0 : raw_spin_lock_irqsave(&x->wait.lock, flags);
340 0 : raw_spin_unlock_irqrestore(&x->wait.lock, flags);
341 0 : return true;
342 : }
343 : EXPORT_SYMBOL(completion_done);
|
